ADORYL / 3D PRINTING PRICE INDIA
What 3D printing costs in India, in 2026.
These are the actual rates Adoryl quotes on, not a range. A custom print is priced from the material it consumes, the time the machine runs, and a fixed setup charge. Everything below feeds the same calculation, so a quote can be checked by hand.
Material rates, per gram
Filament is charged on the weight the slicer reports for your file, including supports and the skirt.
| Material | Rate | Typically used for |
|---|---|---|
| PLA | ₹6 per gram | Stiff and dimensionally accurate. The default for display pieces, décor and most gifting. |
| PETG | ₹8 per gram | Tougher and more heat-tolerant than PLA. Chosen for parts that get handled or live outdoors. |
| ASA | ₹10 per gram | UV-stable and weather-resistant. Used where a part sits in sunlight for months. |
| TPU | ₹14 per gram | Flexible. Gaskets, grips, straps and anything that needs to bend without cracking. |
Machine time, setup and the minimum
| Machine time | ₹0.83 per minute, which is about ₹49.80 per hour of printing. |
|---|---|
| Setup and basic cleanup | ₹149 per order, charged once. |
| Process allowance | 10% on material and machine time. This covers failed prints and re-runs, so a failure on our side is not re-billed to you. |
| Minimum order | ₹499. A job that prices below this is brought up to it; nothing else changes. |
Quantity discounts
Applied automatically. No negotiation, no quote-chasing.
- 5 or more of the same part — 5% off
- 10 or more of the same part — 10% off
- 25 or more of the same part — 15% off
Three worked examples
Each of these is priced by the same engine that produces a real quote, using the weight and print time a slicer would report.
A small desk organiser
PLA, 65 g and 190 minutes per part, ×1.
| Material and consumables | ₹390 |
|---|---|
| Machine time | ₹157.70 |
| Setup and basic cleanup | ₹149 |
| Process allowance | ₹54.77 |
| Subtotal | ₹751.47 |
A replacement bracket, printed in a tougher material
PETG, 40 g and 110 minutes per part, ×2.
| Material and consumables | ₹640 |
|---|---|
| Machine time | ₹182.60 |
| Setup and basic cleanup | ₹149 |
| Process allowance | ₹82.26 |
| Subtotal | ₹1,053.86 |
Ten corporate gift pieces
PLA, 55 g and 145 minutes per part, ×10.
| Material and consumables | ₹3,300 |
|---|---|
| Machine time | ₹1,203.50 |
| Setup and basic cleanup | ₹149 |
| Process allowance | ₹450.35 |
| Quantity discount | −₹173.38 |
| Subtotal | ₹4,929.47 |
What these numbers do not include
A custom quote subtotal excludes tax and delivery. Both are added and shown in full before you pay — delivery is calculated from your India PIN code at checkout, never estimated after the fact. This is the one place the two halves of the catalogue differ: a ready-made product in the shop shows a single price that already includes taxes, because it is a fixed product rather than a job priced from your file.
A quote holds for 7 days. Automatic quoting covers jobs up to ₹50,000, up to 3,000 g and 72 hours of printing per part. Past any of those, a person reviews the job before quoting.
Why a printed part costs what it does
Material is rarely the largest line. A part that takes three hours to print carries roughly ₹149.40 of machine time before a single gram is counted, which is why two objects of the same weight can price very differently: geometry that needs supports, fine layers or slow perimeters occupies the machine for longer. Reducing infill or splitting a tall part often saves more than switching material does.
Printing starts only after an order is confirmed, so nothing is priced against warehouse stock. We show no crossed-out reference price, run no countdowns, and do not claim stock is running out.
Common questions about lead times, materials and returns are answered on the questions page.
Rates on this page reflect quote policy 2026-08-05-in-consumer-01. To price your own file, see how pricing works or send the file.