Design still moving
Validate fit, access, and assembly before committing to production tooling.
White-label rapid manufacturing / India
Turn approved CAD into parts that keep projects moving.
Functional FDM first articles, low-load fixtures, enclosure bridge batches, and large-format masters—produced against a defined revision and agreed checks.
Custom B2B workGST invoicingFreight quoted separatelySafety-critical uses excluded
Machine envelope340 × 320 × 340 mm
Material pathPETG · ASA · selected engineering polymers
Production gateFirst article before repeat batch
Source controlPartner-approved CAD and revision record
WHY ADORYL / 00
AThe awkward middle is where we work.
Your design is too early for committed tooling, too specific for an off-the-shelf part, and too important for an anonymous upload queue. Adoryl creates a controlled path from approved geometry to an accepted first article and repeatable small batch.
Standard parts do not fit
Produce application-specific nests, mounts, trays, and housings.
The revision matters
Tie each delivery to an approved file, material, and acceptance check.
CAPABILITIES / 01—03
Three focused ways to shorten the next revision.
Productized scopes keep the technical handoff clear. Final prices and lead times are confirmed only after slicing, material review, and production scheduling.
A/01
Automation integrators · Machine builders · Quality teams
Fixture Sprint
Low-load inspection nests, assembly trays, sensor mounts, and drill templates produced from partner-approved geometry.
- DFM screen and sliced production review
- One paid first article
- Agreed critical-dimension check
- Print and QC photographs
- One defined correction
PROCESS VISUALISATION
A/02
PCB designers · Embedded studios · IoT integrators
Enclosure Bridge
Board-fit enclosure iterations followed by controlled 5–50-unit bridge batches with inserts, port revisions, and file identification.
- Board STEP and connector DFM review
- First fit-check article
- Revision-labelled repeat batch
- Optional heat-set inserts
- Agreed dimensional checks
PROCESS VISUALISATION
A/03
Packaging agencies · Vacuum-forming partners · Model studios
Form Master
Large-format masters for packaging trials and process validation, with an agreed finish and one controlled correction.
- Orientation and manufacturability review
- Large one-piece print where suitable
- Agreed fill-and-sand finish
- Dimensional photographs or report
- One defined correction
PROCESS VISUALISATION
JOB TRAVELLER / 04
One approved revision at a time.
A simple gate keeps assumptions visible before custom production begins.
- 01
Define
Intended use, file revision, operating conditions, quantity, and acceptance check.
- 02
Screen
FDM suitability, manufacturability, material choice, schedule, and exclusions.
- 03
Validate
A paid first article is printed, finished, photographed, and checked.
- 04
Correct
One agreed revision is incorporated without losing the approved baseline.
- 05
Repeat
Accepted parts move into a documented bridge batch with revision identity.
NOTE / Lead time is confirmed after slicing, material review, and production scheduling.
PARTNER PROGRAMME / 05
You own the relationship. We handle the make.
Confidential, white-label FDM capacity for studios and integrators that already own the application knowledge. Your end-client relationship stays yours.
Discuss partner capacity01
Mutual NDA available before confidential geometry is shared.
02
No end-client solicitation. First validation jobs ship to the partner.
03
Partner-approved geometry. Application decisions remain with the expert.
04
No exclusivity during validation. Referral terms follow collected revenue.
WHAT TRAVELS / 06
Useful records, not ornamental paperwork.
Each functional job is scoped around what the partner actually needs to review and repeat.
Revision identity
The approved file and job revision travel with the order.
Process record
Material, orientation, profile, and production notes are recorded.
Agreed checks
Critical dimensions are checked using the method defined in the quote.
Visual evidence
First-article and QC photographs make the handoff reviewable.
M
MATERIAL PATH / 07
Material follows the application.
| Material | Useful starting point | Application boundary |
|---|---|---|
| PETG | Fit checks, trays, bridge batches | Confirm heat, chemicals, and load |
| ASA | Outdoor-facing prototypes and aids | Life and weathering require validation |
| PLA | Appearance models and masters | Avoid sustained heat and functional load |
| Selected engineering polymers | Stiffness or temperature-led jobs | Accepted only after application review |
+
SCOPE FILTER / A
Good fit
- Partner-approved functional CAD
- Low-load fixtures and assembly aids
- Extra-low-voltage enclosure prototypes
- Packaging and thermoform masters
- Non-safety tooling and revision batches
×
SCOPE FILTER / B
Not accepted
- Medical or patient-contact parts
- Toys, PPE, helmets, or fire-safety equipment
- Mains enclosures, lifting, pressure, or gas parts
- Vehicle-safety parts, guards, or interlocks
- Weapons or unlicensed branded and character IP
PROJECT INTAKE / 08
Have a part waiting on the next revision?
Tell us what the part does, which file is approved, how many you need, and what acceptance looks like. We will assess whether FDM is the right process before preparing a quote.
COMMERCIAL DEFAULT
Prefer a direct email?projects@adoryl.comInitial custom jobs: 70% advance · balance before dispatch · no COD.